Set up your own cloud-native simulation in minutes.Start Simulating Now
156
0
3 Geometries
1 Mesh
2 Simulation setups
4 ResultsThe objective of this simulation is to become familiar with the fan-based Boundary Conditions implemented in SimScale. These Boundary Conditions create a pressure drop on the face applied. This pressure drop depends on the flux going in/out through the surface, and they are related following the charasteristic curve of the fan. Using this Boundary Conditions, different types of fans can be simulated behind the surfaces, and their effects on the different ducts can be estimated. - Copy
3 Geometries 1 Mesh 2 Simulation setups 4 ResultsThe objective of this simulation is to become familiar with the fan-based Boundary Conditions implemented in SimScale. These Boundary Conditions create a pressure drop on the face applied. This pressure drop depends on the flux going in/out through the surface, and they are related following the charasteristic curve of the fan. Using this Boundary Conditions, different types of fans can be simulated behind the surfaces, and their effects on the different ducts can be estimated. - Copy
39cb601b-a39a-4884-a95c-7b70d4efafb1 created this project
over 10 years ago
lsutton copied this project
almost 3 years ago
